華為DHCP+VLANDHCP RELAY配置重點
拓撲如下：
1、SW和Router均需開啟DHCP enable，以及配置對應的vlan
2、DHCP RELAY資訊配置在SW裡面
3、DHCP POOL配置在Router裡面
4、Router裡面需要配置預設路由，閘道器指向SW的vlan10閘道器
5、連線dhcp客戶端的乙太網介面均需配置好vlan模式。
SW配置：
vlan batch 10 20 30
dhcp enable
interface Vlanif10
ip address 12.1.1.1 255.255.255.0
#
interface Vlanif20
ip address 192.168.20.1 255.255.255.0
dhcp select relay
dhcp relay server-ip 12.1.1.2
#
interface Vlanif30
ip address 172.17.30.1 255.255.255.0
dhcp select relay
dhcp relay server-ip 12.1.1.2
interface GigabitEthernet0/0/1
port link-type access
port default vlan 10
#
interface GigabitEthernet0/0/2
port link-type access
port default vlan 20
#
interface GigabitEthernet0/0/3
port link-type access
port default vlan 30
#
Router配置：
vlan batch 10 20 30
dhcp enable
#
ip pool vlan20
gateway-list 192.168.20.1
network 192.168.20.0 mask 255.255.255.0
excluded-ip-address 192.168.20.2 192.168.20.100
dns-list 192.168.20.1
#
ip pool vlan30
gateway-list 172.17.30.1
network 172.17.30.0 mask 255.255.255.0
lease day 8 hour 0 minute 0
dns-list 172.17.30.1
#
interface GigabitEthernet0/0/0
ip address 12.1.1.2 255.255.255.0
dhcp select global
#
ip route-static 0.0.0.0 0.0.0.0 12.1.1.1