VC配置檔案ini的讀寫
ini檔案(即Initialization file),這種型別的檔案中通常存放的是一個程式的初始化資訊。ini檔案由若干個節(Section)組成,每個Section由若干鍵(Key)組成,每個Key可以賦相應的值。讀寫ini檔案實際上就是讀寫某個的Section中相應的Key的值,而這隻要藉助幾個函式即可完成。
一、向ini檔案中寫入資訊的函式
1. 把資訊寫入系統的win.ini檔案
BOOL WriteProfileString(
LPCTSTR lpAppName, // 節的名字,是一個以0結束的字串
LPCTSTR lpKeyName, // 鍵的名字,是一個以0結束的字串。若為NULL,則刪除整個節
LPCTSTR lpString // 鍵的值,是一個以0結束的字串。若為NULL,則刪除對應的鍵
)
2. 把資訊寫入自己定義的.ini檔案
BOOL WritePrivateProfileString(
LPCTSTR lpAppName, // 同上
LPCTSTR lpKeyName, // 同上
LPCTSTR lpString, // 同上
LPCTSTR lpFileName // 要寫入的檔案的檔名。若該ini檔案與程式在同一個目錄下,也可使用相對
//路徑,否則需要給出絕度路徑。
)
如:
::WriteProfileString("Test","id","xym");
//在win.ini中建立一個Test節,並在該節中建立一個鍵id,其值為xym
::WritePrivateProfileString("Test","id","xym","d://vc//Ex1//ex1.ini");
//在Ex1目錄下的ex1.ini中建立一個Test節,並在該節中建立一個鍵id,其值為xym
//若Ex1.ini檔案與讀寫該檔案的程式在同一個目錄下,則上面語句也可寫為:
::WritePrivateProfileString("Test","id","xym",".//ex1.ini");
需要注意的是,C系列的語言中,轉義字元'//'表示反斜線'/'。另外,當使用相對路徑時,//前的.號不能丟掉了。
二、從ini檔案中讀取資料的函式
1、從系統的win.ini檔案中讀取資訊
(1) 讀取字串
DWORD GetProfileString(
LPCTSTR lpAppName, // 節名
LPCTSTR lpKeyName, // 鍵名,讀取該鍵的值
LPCTSTR lpDefault, // 若指定的鍵不存在,該值作為讀取的預設值
LPTSTR lpReturnedString, // 一個指向緩衝區的指標,接收讀取的字串
DWORD nSize // 指定lpReturnedString指向的緩衝區的大小
)
如:
CString str;
::GetProfileString("Test","id","Error",str.GetBuffer(20),20);
(2) 讀取整數
UINT GetProfileInt(
LPCTSTR lpAppName, // 同上
LPCTSTR lpKeyName, // 同上
INT nDefault // 若指定的鍵名不存在,該值作為讀取的預設值
)
如使用以下語句寫入了年齡資訊:
::WriteProfileString("Test","age","25");
//在win.ini中建立一個Test節,並在該節中建立一個鍵age,其值為25
則可用以下語句讀取age鍵的值:
int age;
age=::GetProfileInt("Test","age",0);
2、從自己的ini檔案中讀取資訊
(1) 讀取字串
DWORD GetPrivateProfileString(
LPCTSTR lpAppName, // 同1(1)
LPCTSTR lpKeyName, // 同1(1)
LPCTSTR lpDefault, // 同1(1)
LPTSTR lpReturnedString, // 同1(1)
DWORD nSize, // 同1(1)
LPCTSTR lpFileName // 讀取資訊的檔名。若該ini檔案與程式在同一個目錄下,也可使用相
//對路徑,否則需要給出絕度路徑。
)
如:
CString str;
::GetPrivateProfileString("Test","id","Error",str.GetBuffer(20),20,".//ex1.ini");
或:
::GetPrivateProfileString("Test","id","Error",str.GetBuffer(20),20,"d://vc//Ex1//ex1.ini");
(2) 讀取整數
UINT GetPrivateProfileInt(
LPCTSTR lpAppName, // 同上
LPCTSTR lpKeyName, // 同上
INT nDefault, // 若指定的鍵名不存在,該值作為讀取的預設值
LPCTSTR lpFileName // 同上
)
如使用以下語句寫入了年齡資訊:
::WritePrivateProfileString("Test","age","25",".//ex1.ini");
//在ex1.ini中建立一個Test節,並在該節中建立一個鍵age,其值為25
則可用以下語句讀取age鍵的值:
int age;
age=::GetPrivateProfileInt("Test","age",0,".//ex1.ini");
三、 刪除鍵值或節
回顧一下WriteProfileString函式的說明
BOOL WriteProfileString(
LPCTSTR lpAppName, // 節的名字,是一個以0結束的字串
LPCTSTR lpKeyName, // 鍵的名字,是一個以0結束的字串。若為NULL,則刪除整個節
LPCTSTR lpString // 鍵的值,是一個以0結束的字串。若為NULL,則刪除對應的鍵
)
由此可見,要刪除某個節,只需要將WriteProfileString第二個引數設為NULL即可。而要刪除某個鍵,則只需要將該函式的第三個引數設為 NULL即可。這是刪除系統的win.ini中的節或鍵,類似的,要刪除自己定義的ini檔案中的節或鍵,也可做相同的操作。
如:
::WriteProfileString("Test",NULL,NULL); //刪除win.ini中的Test節
::WriteProfileString("Test","id",NULL); //刪除win.ini中的id鍵
::WritePrivateProfileString("Test",NULL,NULL,".//ex1.ini"); //刪除ex1.ini中的Test節
::WritePrivateProfileString("Test","id",NULL,".//ex1.ini"); //刪除ex1.ini中的id鍵
四、如何判斷一個ini檔案中有多少個節
要判斷一個ini檔案中有多少個節,最簡單的辦法就是將所有的節名都找出來,然後統計節名的個數。而要將所有的節名找出來,使用GetPrivateProfileSectionNames函式就可以了,其原型如下:
DWORD GetPrivateProfileSectionNames(
LPTSTR lpszReturnBuffer, // 指向一個緩衝區,用來儲存返回的所有節名
DWORD nSize, // 引數lpszReturnBuffer的大小
LPCTSTR lpFileName // 檔名,若該ini檔案與程式在同一個目錄下,
//也可使用相對路徑,否則需要給出絕度路徑
)
下面的是用來統計一個ini檔案中共有多少個節的函式,當然,如果需要同時找到每個節中的各個鍵及其值,根據找到節名就可以很容易的得到了。
/*統計共有多少個節
節名的分離方法:若chSectionNames陣列的第一字元是'/0'字元,則表明
有0個節。否則,從chSectionNames陣列的第一個字元開始,順序往後找,
直到找到一個'/0'字元,若該字元的後繼字元不是 '/0'字元,則表明前
面的字元組成一個節名。若連續找到兩個'/0'字元,則統計結束*/
int CTestDlg::CalcCount(void)
{
TCHAR chSectionNames[2048]={0}; //所有節名組成的字元陣列
char * pSectionName; //儲存找到的某個節名字串的首地址
int i; //i指向陣列chSectionNames的某個位置,從0開始,順序後移
int j=0; //j用來儲存下一個節名字串的首地址相對於當前i的位置偏移量
int count=0; //統計節的個數
//CString name;
//char id[20];
::GetPrivateProfileSectionNames(chSectionNames,2048,".//ex1.ini");
for(i=0;i<2048;i++,j++)
{
if(chSectionNames[0]=='/0')
break; //如果第一個字元就是0,則說明ini中一個節也沒有
if(chSectionNames[i]=='/0')
{
pSectionName=&chSectionNames[i-j]; //找到一個0,則說明從這個字元往前,減掉j個偏移量,
//就是一個節名的首地址
j=-1; //找到一個節名後,j的值要還原,以統計下一個節名地址的偏移量
//賦成-1是因為節名字串的最後一個字元0是終止符,不能作為節名
//的一部分
/*::GetPrivateProfileString(pSectionName,"id","Error",id,20,".//ex1.ini");
name.Format("%s",id);*/
//在獲取節名的時候可以獲取該節中鍵的值,前提是我們知道該節中有哪些鍵。
AfxMessageBox(pSectionName); //把找到的顯示出來
if(chSectionNames[i+1]==0)
{
break; //當兩個相鄰的字元都是0時,則所有的節名都已找到,迴圈終止
}
}
}
return count;
}
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////
在VC程式中利用系統提供的GetPrivateProfileString及WritePrivateProfileString函式直接讀寫系統配置ini檔案(指定目錄下的Ini檔案)
假設在當前目錄下有一個檔名為Tets.ini的檔案
用於儲存使用者名稱和密碼
檔案格式如下:
[Section1]
Item1=huzhifeng
Item2=1234565
1.寫INI檔案
void CINI_File_TestDlg::OnButtonWrite()
{
// TODO: Add your control notification handler code here
CString strSection = "Section1";
CString strSectionKey = "Item1";
char strBuff[256];
CString strValue = _T("");
CString strFilePath;
strFilePath=GetCurrentDirectory(256,strBuff); //獲取當前路徑
strFilePath.Format("%s//Test.ini",strBuff);
GetDlgItemText(IDC_EDIT_NAME,strValue); //獲取文字框內容:即姓名
WritePrivateProfileString(strSection,strSectionKey,strValue,strFilePath); //寫入ini檔案中相應欄位
strSectionKey="Item2";
GetDlgItemText(IDC_EDIT_PASSWORD,strValue); //獲取文字框內容:即密碼
WritePrivateProfileString(strSection,strSectionKey,strValue,strFilePath);
}
2.讀INI檔案內容
void CINI_File_TestDlg::OnButtonRead()
{
// TODO: Add your control notification handler code here
CString strSection = "Section1";
CString strSectionKey = "Item1";
char strBuff[256];
CString strValue = _T("");
CString strFilePath;
strFilePath=GetCurrentDirectory(256,strBuff); //獲取當前路徑
strFilePath.Format("%s//Test.ini",strBuff);
GetPrivateProfileString(strSection,strSectionKey,NULL,strBuff,80,strFilePath); //讀取ini檔案中相應欄位的內容
strValue=strBuff;
SetDlgItemText(IDC_EDIT_NAME,strValue);
strSectionKey="Item2";
GetPrivateProfileString(strSection,strSectionKey,NULL,strBuff,80,strFilePath);
strValue=strBuff;
SetDlgItemText(IDC_EDIT_PASSWORD,strValue);
UpdateData(FALSE);
}