說得有些複雜，你可以不用理會這些，直接執行我羅列的那幾個命令就行了。

方法一：網上有說In some cases ,the new install Gforce Drivers do not supporte the "nouveau" module, 它指出某些情況下（可能是因為更新了核心後），原來的nvidia driver與nouveau有衝突。

建議在grub  kernel行中禁用nouveau.也就是加入引數rdblacklist=nouveau就行了。

比如： menuentry "GNU/Linux"{

set root='(hd0,5)' linux /boot/vmlinuz* root=UUID=6c49b6c5-04d3-4da7-b629-a3f4aae86616 ro rdblacklist=nouveau rhgb

initrd /boot/initramfs-2.6.34.7-61.fc13.i686.img }

=============================================

方法二：我的做法是重新升級核心，再更新nvidia的驅動，問題解決了

下面提到每次升級核心後（應該是針對Nvidia部分顯示卡），我們都需要重新安裝顯示卡驅動，否則會出現一些問題。

Re this problem. Nothing to do with atd! When we installed the nvidia driver, if we'd remembered, it said there is a bit to do to make the kernel interface module? See http://us.download.nvidia.com/XFree8...ection-03.html So, each time we get a kernel update, we need to 're-install' the drivers? My sequence was: 1. In /etc/inittab id:5:initdefault: # DP for updating the NVIDIA drivers #id:3:initdefault: Comment out the '5' line Uncomment the '3' line This makes it boot into non graphical mode, needed to mess with X windows. reboot. This brings up the most recent kernel. Need to run that so the nvidia driver installation can find a matching interface module? run your installation script (as root - indeed all this stuff needs to be done as root). Pre-conditions for this. 1. You have your network active - so it can go ask nvidia server if there is a compiled interface - not likely with FC11 # service network start 2. You have sources for the kernel, needed to compile the interface software? # yum install kernel-PAE-devel This may not match your kernel! Use # uname -a to find out which kernel you have. I think this includes all the headers. if you get a message about that, try # yum install kernel-headers 3. run the nvidia driver file # chmod +x NVIDIA-Linux-x86-185.18.36-pkg1.run (the number might be different. That's todays latest version) Get it from http://www.nvidia.com/object/linux_d...185.18.36.html Follow the screen instructions. Should all build OK. 4. At the end it offers to 'run nvidia-xconfig' ..... If you've done all this, skip this by choosing NO That's just the configuration that you've already done. 5. Change /etc/inittab id:5:initdefault: # DP for updating the NVIDIA drivers #id:3:initdefault: Back to runlevel 5, full X windows graphical mode. reboot... It all worked for me. YMMV

好吧，那我就按照以上的步驟來做吧：

1. 下載nvidia driver # chmod +x Downloads/NVIDIA-Linux-x86-260.19.12.run 2 進入runlevel3並安裝顯示卡驅動： #sh Downloads/NVIDIA-Linux-x86-260.19.12.run #nvidia-xconfig 注：它可能會提示：disable nouveau kernel driver，點確認就可以了。 注：安裝完畢後可執行這個命令進行自動配置： 'run nvidia-xconfig' .. 3.（或許這一步不是必須的，原因在方法一中已經說明）開啟/boot/grub2/grub.cfg,在linux行新增rdblacklist=nouveau，比如： menuentry "GNU/Linux"{ set root='(hd0,5)' linux /boot/vmlinuz* root=UUID=6c49b6c5-04d3-4da7-b629-a3f4aae86616 ro quiet rdblacklist=nouveau rhgb initrd /boot/initramfs-2.6.34.7-61.fc13.i686.img }

裡面提到了：

For GeForce 6, 7, 8, 9 & 200 series cards Code: su rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 If you use a PAE kernel Code: su rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm yum install kmod-nvidia-PAE Or (akmod builds the required kmod on bootup ) Code: su rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm yum install akmod-nvidia xorg-x11-drv-nvidia-libs.i686 2. Edit grub.conf ( if you omit this step the driver will fail to work ) this command adds rdblacklist=nouveau option to /boot/grub/grub.conf

按照上面的步驟執行以下命令就OK了：

<strong>1.新增yum 映象並安裝nvidia顯示卡驅動。 # rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm #yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 2.更新核心 #yum install kernel-devel ls /boot/vmlinuz* #你可以用這個命令檢視下核心。 3.手動修改/boot/grub2/grub.cfg,（也可使用grub2-mkconfig自動修改） </strong> 

主要是先裝核心，再在多使用者命令模式（run level 3）下安裝顯示卡（如果官網的顯示卡不行，就按照上面提到的針對各種kernel顯示卡的安裝方法安裝），安裝顯示卡驅動前先解除安裝掉當前的顯示卡（rpm -qa|grep nvidia,Nvidia提供的用命令nvidia-uninstall解除安裝），記得加上rdblacklist=nouveau.