交叉編譯openssh出現錯誤Makefile:548: recipe for target 'install_sw' failed
交叉編譯openssh出現錯誤
將OpenSSH移植到ARM Linux,交叉編譯openssh時,在第二步編譯openssl時,make install出現如下錯誤:
cp: 'e_os2.h' and '/home/word/iTOP-4412-Linux-ssh/openssl-1.0.2l/include/openssl/e_os2.h' are the same file
Makefile:548: recipe for target 'install_sw' failed
make: *** [install_sw] Error 1
如下圖:
這個錯誤主要是在配置檔案時,將安裝目錄配置到了原始碼目錄下:
$ cd ../openssl-1.0.1l
$ ./Configure --prefix=/home/veryarm/ssh/openssl.install os/compiler:arm-none-linux-gnueabi-gcc
$ make
$ make install
也就是上面的/home/veryarm/ssh/openssl.install安裝目錄,不要填寫成 ../openssl-1.0.1l目錄,這樣ok了。
相關推薦
交叉編譯openssh出現錯誤Makefile:548: recipe for target 'install_sw' failed
交叉編譯openssh出現錯誤 將OpenSSH移植到ARM Linux,交叉編譯openssh時,在第二步編譯openssl時,make install出現如下錯誤: cp: 'e_os2.h' and '/home/word/iTOP-4412-Li
Makefile:160: recipe for target 'all' failed(ubuntu16.04+opencv3.4+gcc5.4.0)
安裝並編譯的步驟如下 wget https://github.com/opencv/opencv/archive/3.4.0.zip 2、 Unzip it and create a build folder: sudo unzip 3.4.0.zip cd
Caffe-ssd編譯錯誤:Makefile:570: recipe for target '.build_release/lib/libcaffe.so.1.0.0-rc3' failed
在編譯Caffe-SSD時候遇到以下問題: Makefile:570: recipe for target '.build_release/lib/libcaffe.so.1.0.0-rc3' fail
openwrt多執行緒程式交叉編譯時候出現錯誤解決方法
[email protected]:~/smb/lc_smarthome$ mipsel-openwrt-linux-gcc lc_tty.c lc_tty.h main.c -lpthread -o main 會出現一下錯誤: /work/openwrt/tru
Ubuntu18.04編譯Nginx報錯objs/Makefile:460: recipe for target 'objs/src/core/ngx_murmurhash.o' failed
問題描述 在Ubuntu18.04上安裝Ngnix,在編譯步驟出現如下錯誤: cc1: all warnings being treated as errors objs/Makefile:460:
~/caffe$ make all -j8 Makefile:606: recipe for target '.build_release/cuda/src/caffe/solvers/adam_s
cuda9.0+cudnn7.0.5下,編譯caffe 執行出錯: [email protected]:~/caffe$ make all -j8 NVCC src/caffe/solvers/adam_solver.cu NVCC src/caffe/solve
編譯ROS的package包出錯,提示recipe for target 'all' failed
最近在學習ROS機器人作業系統,嘗試自己新建node,發現編譯始終不通過貼出問題程式碼/usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/crt1.o: In function `_start': (.text+
opencv recipe for target 'all' failed解決
在編譯opencv3.0的時候,編譯到了90%都成功了,然後報了這個異常,網上搜索,也沒找到正確方法 最後解決方式是: 之前的指令碼都需要執行 在執行apt-get update時,下載一個東西,下載了1000多遍也不成,把update註釋掉,再執行前面的安裝 再編譯,就
【筆記】libjpeg的移植,make編譯時出現錯誤
問題描述: [email protected]:~/decodeporing/jpeg-6b# make./libtool --mode=compile arm-linux-gcc -O2 -I. -c ./jcapimin.c make: ./libtool:命令未找到
編譯caffe出現錯誤:make: *** [.build_release/src/caffe/common.o] Error 1
在編譯caffe時出現錯誤: In file included from ./include/caffe/util/device_alternate.hpp:40:0, from ./include/caffe/common.hpp:19
mips交叉編譯環境出現/bin/sh: 1: /bin/gawk/: not found
昨天交叉編譯器是安裝好了,但是在測試編譯的時候出現了個錯誤,找了一下午沒找到,然後早上終於找到了原因以及解決辦法。 錯誤提示意思是沒找到gawk,而我昨天已經安裝了gawk,然後通過命令type gawk可以得到結果gawk is hashed (/usr/b
編譯時出現錯誤 -- clang: error: linker command failed with exit code 1 (use -v to see invocation)
出現這個錯誤的原因有多種,常見的是因為某些檔案的缺失或者是檔案的重複導致的。 這類錯誤檢視的關鍵在於其上一行的文字。 對於檔案缺少而導致錯誤的情況: 例如上圖中的示例,其上一行文字為 ld:library not found for -lrxl,可以看出是缺失了某一
ubuntu編譯android6.0錯誤recipe for target 'out/host/linux-x86/obj/lib/libart.so' failed
trip: libpagemap_32 (out/target/product/xx/obj_arm/lib/libpagemap.so) target Strip: librilutils_32 (out/target/product/xx/obj_arm/lib/lib
編譯核心出現錯誤
[email protected]:~/sda3/green/linux/build$ sh build.sh # configuration written to .config # scripts/kconfig/conf --silentol
Ubuntu16.04 編譯 opencv 出現錯誤:Unsupported gpu architecture 'compute_20'
我的cuda版本是9.0,估計就是版本問題,網上有人說把cuda降到8.0以下。這個方法真是扯淡~其實只要在編譯的時候加一句話就好了cmake -D CMAKE_BUILD_TYPE=RELEASE -
java在命令列中編譯程式碼出現 錯誤: 編碼GBK的不可對映字元
在編譯的時候,如果我們沒有用-encoding引數指定我們的JAVA源程式的編碼格式,則javac.exe會獲得我們作業系統預設採用的編碼格式。 JDK根據作業系統的file.encoding引數(它儲存的就是作業系統預設的編碼格式,如WIN2k,它的值為GBK),把源程式
[7]_編譯核心錯誤提示2:recipe for target 'kernel/timeconst.h' failed 和 "mkimage" command not found
----------------------------------------------------------------編譯核心出現的錯誤---------------------------
關於編譯核心出現錯誤的解決方法
1、在make menuconfigure 的時候會出現 缺少libncurses5-dev的錯誤: 由於ubuntu11.10處於離線模式,apt-get命令並不能解決問題,可以去下載libncurses5-dev的安裝包,進行解壓縮,將所產生的libncurses5-d
交叉編譯生成模組的makefile寫法
以S3C6410為例,此時arm-none-linux-gnueabi-4.3.2已經安裝完畢。 首先把和板子上燒寫的核心同樣的核心原始碼放置到任意目錄下,如/usr/src/s3c-linux-2.6.28.6-Real6410。(核心原始碼需要配置,而板子附帶CD上一般是配置好的,在上面修改簡單一些
iperf交叉編譯執行出現illegal instruction問題
轉載請註明出處:https://blog.csdn.net/luomin5417/article/details/77770886最近在基於at91sam9x5 系列CPU做開發,進行iperf程式移植的時候遇到一個illegal instruct的問題,問題如圖1-1: 圖