1. 程式人生 > 實用技巧 >H3C室外無線AP(WA4320X)胖瘦切換設定方法

H3C室外無線AP(WA4320X)胖瘦切換設定方法

因客戶有一臺H3CWA4320X無線AP是有胖、瘦切換的功能,但在出廠時預設為瘦模式,無線AP上並沒有兩種模式的切換開關,打電話給廠家說是重新整理韌體才能支援為胖模式。於是我使用串列埠線連線AP上的console口進行除錯。

1、檢視一下無線AP當前的配置,發現無IP地址:

[WA4320X]dis cur

#

version 5.20, Release 1508P11

#

sysname WA4320X

#

telnet server enable

#

password-recovery enable

#

vlan 1

#

interface NULL0

#

interface Vlan-interface1

#

interface GigabitEthernet1/0/1

#

interface WLAN-Radio1/0/1

#

interface WLAN-Radio1/0/2

2、手動新增IP地址為192.168.0.50,為傳輸檔案做準備

[WA4320X]int vlan 1

[WA4320X-Vlan-interface1]ip address 192.168.0.50 24

[WA4320X-Vlan-interface1]qu

3、在電腦上開啟3CD伺服器:

1.png

4、裝置好本機的IP地址和無線AP同一網段,使用網線連線APGE1

1.png

5、刪除AP上的瘦版本

<WA4320X>delete /unreserved wa4300_fit.bin

The contents cannot be restored!!! Delete flash:/wa4300_fit.bin?[Y/N]:y

Deleting a file permanently will take a long time. Please wait...

%Apr 26 12:03:25:284 2000 WA4320X WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has exited zero configuration state.

%Delete file flash:/wa4300_fit.bin...Done.

6、把要重新整理的韌體檔案改名為wa4300_fat.bin,並放到3CDaemon目錄下

1.png

7、把胖版本傳到AP上,並用它dir檢視版本已經在AP上:

<WA4320X>tftp 192.168.0.51 get wa4300_fat.bin

File will be transferred in binary mode

Downloading file from remote TFTP server, please wait...\

%Apr 26 12:06:30:290 2000 WA4320X WMSH/6/WMESH_ENTER_ZERO_CFG_STATE: The device has entered zero configuration state./

TFTP: 11062272 bytes received in 35 second(s)

File downloaded successfully.

<WA4320X> dir /all

Directory of flash:/

0 -rw- 11062272 Apr 26 2000 12:07:03 wa4300_fat.bin

130688 KB total (118730 KB free)

8、設定下次啟動檔案,:

<WA4320X>boot-loader file flash:/wa4300_fat.bin

%Apr 26 12:07:55:424 2000 WA4320X WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has exited zero configuration state.

Verifying boot file ......

%Apr 26 12:08:00:868 2000 WA4320X WMSH/6/WMESH_ENTER_ZERO_CFG_STATE: The device has entered zero configuration state.

This command will set the boot file. Continue? [Y/N]:

Before pressing ENTER you must choose 'YES' or 'NO'[Y/N]:

Before pressing ENTER you must choose 'YES' or 'NO'[Y/N]:

Before pressing ENTER you must choose 'YES' or 'NO'[Y/N]:y

The specified file will be used as the boot file at the next reboot on slot 1!

9、使用reboot重啟裝置,web頁面登陸http://192.168.0.50,可以登陸表示胖模式重新整理成功。

1.png





轉載於:https://blog.51cto.com/lijie1977/2121554