instagram加速器_如何調整Instagram過濾器的強度以使其不至於過壓
instagram加速器
The secret to good photo editing is not knowing what to do, but knowing when to stop. Anyone can add tons of contrast and saturation and come away with a “stylized” image, but not everyone has the restraint to add just the right amount of contrast or saturation. The same is true with Instagram filters.
好的照片編輯的祕訣不是知道要做什麼，而是知道何時停止。 任何人都可以新增大量的對比度和飽和度，並獲得“風格化”的影象，但並不是每個人都只能新增適量的對比度或飽和度。 Instagram過濾器也是如此。
Back when Instagram first launched, filters were either on or off; there was no middle ground. This gave every filtered image posted to Instagram a distinctive look, but it also meant a lot of people choose to go with #NoFilter. Now though, you can tone down the strength of the filters to get more subtle effects. Let’s look at how.
回到Instagram首次釋出時，過濾器處於開啟或關閉狀態。 沒有中間立場。 這使釋出到Instagram每個過濾影象都具有獨特的外觀，但這也意味著很多人選擇使用#NoFilter。 現在，您可以調低濾鏡的強度以獲得更微妙的效果。 讓我們看看如何。
Open Instagram and select the image you want to edit. I’m going with this portrait of my friend Ali. Tap next to get to the Filter screen.
開啟Instagram，然後選擇要編輯的影象。 我要和我朋友阿里的肖像一起去。 點選下一步進入“過濾器”螢幕。
Tap on the filter you want to add to apply it. By default, it’s applied at full strength. To lower the strength, just tap on the filter again, and you’ll see a slider appear.
點選要新增的過濾器以應用它。 預設情況下，它以全強度應用。 要降低強度，只需再次點選過濾器，就會看到一個滑塊。
Play around with the slider. Drag it over to the left to reduce the strength and to the right to increase it. Somewhere around 19 or 20 adds a nice subtle effect to this image; any higher is a bit too strong. It will most likely be different for your image.
滑動滑塊。 將其向左拖動以減小強度，向右拖動以增大強度。 在19或20左右的某個位置，可以為該影象帶來很好的微妙效果。 再高一點就太強大了。 您的圖片很有可能會有所不同。
Tap Done to go back to the Filter screen and then Next to continue on to post the image.
點選完成返回篩選器螢幕，然後點選下一步繼續釋出影象。
Note, if you apply another filter instead, it will be applied at full strength; you’ll need to go in and reduce the strength again.
請注意，如果您改用另一個過濾器，則會以全強度應用； 您需要進入並再次降低強度。
instagram加速器