Android藍芽實現裝置間資料傳輸
這篇文章總結通過藍芽實現兩臺pad間資料傳輸
文章基於傳統藍芽,而不是BLE。
藍芽應該是移動裝置經常用到的功能模組,Android Bluetooth API 是Android提供的用來實現點到點和多點無線功能。
使用 Bluetooth API,Android 應用可執行以下操作:
- 掃描其他藍芽裝置
- 查詢本地藍芽介面卡的配對藍芽裝置
- 建立 RFCOMM 通道
- 通過服務發現連線到其他裝置
- 與其他裝置進行雙向資料傳輸
- 管理多個連線
藍芽許可權
<manifest ... >
<uses-permission android:name="android.permission.BLUETOOTH" />
<uses-permission android:name="android.permission.BLUETOOTH_ADMIN" />
...
</manifest>
1.設定藍芽
您需要驗證裝置支援藍芽,並且如果支援確保將其啟用,然後您的應用才能通過藍芽進行通訊。
獲取 BluetoothAdapter
所有藍芽 Activity 都需要 BluetoothAdapter。BluetoothAdapter mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter(); if (mBluetoothAdapter == null
啟用藍芽
下一步,您需要確保已啟用藍芽。if (!mBluetoothAdapter.isEnabled()) { Intent enableBtIntent = new Intent(BluetoothAdapter.ACTION_REQUEST_ENABLE); startActivityForResult(enableBtIntent, REQUEST_ENABLE_BT); }
2.搜尋藍芽裝置
要開始發現裝置,只需呼叫 startDiscovery()。該程序為非同步程序,並且該方法會立即返回一個布林值,指示是否已成功啟動發現操作。 發現程序通常包含約 12 秒鐘的查詢掃描,之後對每臺發現的裝置進行頁面掃描,以檢索其藍芽名稱。
/**
* 發現藍芽的廣播
*/
private final BroadcastReceiver mReceiver = new BroadcastReceiver() {
@Override
public void onReceive(Context context, Intent intent) {
String action = intent.getAction();
if(BluetoothDevice.ACTION_FOUND.equals(action)){
BluetoothDevice device = intent.getParcelableExtra(BluetoothDevice.EXTRA_DEVICE);
//todo處理搜尋到的藍芽裝置
}
}
};
在Activity或者Fragment中註冊廣播
IntentFilter filter = new IntentFilter(BluetoothDevice.ACTION_FOUND);
registerReceiver(mReceiver, filter);
3.連線裝置
要在兩臺裝置上的應用之間建立連線,必須同時實現伺服器端和客戶端機制,因為其中一臺裝置必須開放伺服器套接字,而另一臺裝置必須發起連線(使用伺服器裝置的 MAC 地址發起連線)。
伺服器裝置和客戶端裝置分別以不同的方法獲得需要的 BluetoothSocket。伺服器將在傳入連線被接受時收到套接字。 客戶端將在其開啟到伺服器的 RFCOMM 通道時收到該套接字。
注:如果兩臺裝置之前尚未配對,則在連線過程中,Android 框架會自動向使用者顯示配對請求通知或對話方塊。因此,在嘗試連線裝置時,您的應用無需擔心裝置是否已配對。 您的 RFCOMM 連線嘗試將被阻塞,直至使用者成功完成配對或配對失敗(包括使用者拒絕配對、配對失敗或超時)。
- 連線為伺服器
當您需要連線兩臺裝置時,其中一臺裝置必須通過保持開放的 BluetoothServerSocket 來充當伺服器。
- 1.通過呼叫 listenUsingRfcommWithServiceRecord(String, UUID) 獲取 BluetoothServerSocket。
當客戶端嘗試連線此裝置時,它會攜帶能夠唯一標識其想要連線的服務的 UUID。 兩個 UUID 必須匹配,在下一步中,連線才會被接受。 - 通過呼叫 accept() 開始偵聽連線請求。
- 除非您想要接受更多連線,否則請呼叫 close()。
這將釋放伺服器套接字及其所有資源,但不會關閉 accept() 所返回的已連線的 BluetoothSocket。 與 TCP/IP 不同,RFCOMM 一次只允許每個通道有一個已連線的客戶端,因此大多數情況下,在接受已連線的套接字後立即在 BluetoothServerSocket 上呼叫 close() 是行得通的。
- 1.通過呼叫 listenUsingRfcommWithServiceRecord(String, UUID) 獲取 BluetoothServerSocket。
以下是一個用於接受傳入連線的伺服器元件的簡化執行緒:
private class AcceptThread extends Thread {
private final BluetoothServerSocket mmServerSocket;
public AcceptThread() {
// Use a temporary object that is later assigned to mmServerSocket,
// because mmServerSocket is final
BluetoothServerSocket tmp = null;
try {
// MY_UUID is the app's UUID string, also used by the client code
tmp = mBluetoothAdapter.listenUsingRfcommWithServiceRecord(NAME, MY_UUID);
} catch (IOException e) { }
mmServerSocket = tmp;
}
public void run() {
BluetoothSocket socket = null;
// Keep listening until exception occurs or a socket is returned
while (true) {
try {
socket = mmServerSocket.accept();
} catch (IOException e) {
break;
}
// If a connection was accepted
if (socket != null) {
// Do work to manage the connection (in a separate thread)
manageConnectedSocket(socket);
mmServerSocket.close();
break;
}
}
}
/** Will cancel the listening socket, and cause the thread to finish */
public void cancel() {
try {
mmServerSocket.close();
} catch (IOException e) { }
}
}
注意上面是簡化執行緒,也是網上搜索到最多的方法。但是其穩定性真的很差勁。
- 連線為客戶端
要發起與遠端裝置(保持開放的伺服器套接字的裝置)的連線,必須首先獲取表示該遠端裝置的 BluetoothDevice 物件。(在前面有關查詢裝置的部分介紹瞭如何獲取 BluetoothDevice)。 然後必須使用 BluetoothDevice 來獲取 BluetoothSocket 併發起連線。
- 1.使用 BluetoothDevice,通過呼叫 createRfcommSocketToServiceRecord(UUID) 獲取 BluetoothSocket。
- 2.通過呼叫 connect() 發起連線。
以下是發起藍芽連線的執行緒的基本示例:
private class ConnectThread extends Thread {
private final BluetoothSocket mmSocket;
private final BluetoothDevice mmDevice;
public ConnectThread(BluetoothDevice device) {
// Use a temporary object that is later assigned to mmSocket,
// because mmSocket is final
BluetoothSocket tmp = null;
mmDevice = device;
// Get a BluetoothSocket to connect with the given BluetoothDevice
try {
// MY_UUID is the app's UUID string, also used by the server code
tmp = device.createRfcommSocketToServiceRecord(MY_UUID);
} catch (IOException e) { }
mmSocket = tmp;
}
public void run() {
// Cancel discovery because it will slow down the connection
mBluetoothAdapter.cancelDiscovery();
try {
// Connect the device through the socket. This will block
// until it succeeds or throws an exception
mmSocket.connect();
} catch (IOException connectException) {
// Unable to connect; close the socket and get out
try {
mmSocket.close();
} catch (IOException closeException) { }
return;
}
// Do work to manage the connection (in a separate thread)
manageConnectedSocket(mmSocket);
}
/** Will cancel an in-progress connection, and close the socket */
public void cancel() {
try {
mmSocket.close();
} catch (IOException e) { }
}
}
程式碼很容易看懂,就不做過多解釋了。
4.管理連線
在成功連線兩臺(或更多臺)裝置後,每臺裝置都會有一個已連線的 BluetoothSocket。 這一點非常有趣,因為這表示您可以在裝置之間共享資料。 利用 BluetoothSocket,傳輸任意資料的一般過程非常簡單:
- 獲取 InputStream 和 OutputStream,二者分別通過套接字以及 getInputStream() 和 getOutputStream() 來處理資料傳輸。
- 使用 read(byte[]) 和 write(byte[]) 讀取資料並寫入到流式傳輸。
ok,至此,我們基本瞭解了傳統藍芽資料傳輸常用的API以及一些核心API的使用,接下來具體看我在專案中如何處理資料傳輸以及解決藍芽Socket的穩定性。
在瞭解了上面一套機制以後,最開始我也是使用上面的簡單例項進行藍芽資料的傳輸與接受,但在傳輸過程中經常會出現連線異常,Socket斷開等各種異常。經過不斷的尋找解決方案,最後發現了官方一個通過藍芽進行裝置聊天的demo,仔細研究發現主要是通過一個自己封裝的BluetoothChatService,其內部本質還是使用的我們上面介紹的知識,只不過這個Service對連線的處理更詳細。
public class BluetoothChatService {
// Debugging
private static final String TAG = "BluetoothChatService";
// Name for the SDP record when creating server socket
private static final String NAME_SECURE = "BluetoothChatSecure";
private static final String NAME_INSECURE = "BluetoothChatInsecure";
// Unique UUID for this application
private static final UUID MY_UUID_SECURE =
UUID.fromString("fa87c0d0-afac-11de-8a39-0800200c9a66");
private static final UUID MY_UUID_INSECURE =
UUID.fromString("8ce255c0-200a-11e0-ac64-0800200c9a66");
// Member fields
private final BluetoothAdapter mAdapter;
private final Handler mHandler;
private AcceptThread mSecureAcceptThread;
private AcceptThread mInsecureAcceptThread;
private ConnectThread mConnectThread;
private ConnectedThread mConnectedThread;
private int mState;
private int mNewState;
// Constants that indicate the current connection state
public static final int STATE_NONE = 0; // we're doing nothing
public static final int STATE_LISTEN = 1; // now listening for incoming connections
public static final int STATE_CONNECTING = 2; // now initiating an outgoing connection
public static final int STATE_CONNECTED = 3; // now connected to a remote device
/**
* Constructor. Prepares a new BluetoothChat session.
*
* @param context The UI Activity Context
* @param handler A Handler to send messages back to the UI Activity
*/
public BluetoothChatService(Context context, Handler handler) {
mAdapter = BluetoothAdapter.getDefaultAdapter();
mState = STATE_NONE;
mNewState = mState;
mHandler = handler;
}
/**
* Update UI title according to the current state of the chat connection
*/
private synchronized void updateUserInterfaceTitle() {
mState = getState();
Log.d(TAG, "updateUserInterfaceTitle() " + mNewState + " -> " + mState);
mNewState = mState;
// Give the new state to the Handler so the UI Activity can update
mHandler.obtainMessage(Constants.MESSAGE_STATE_CHANGE, mNewState, -1).sendToTarget();
}
/**
* Return the current connection state.
*/
public synchronized int getState() {
return mState;
}
/**
* Start the chat service. Specifically start AcceptThread to begin a
* session in listening (server) mode. Called by the Activity onResume()
*/
public synchronized void start() {
Log.d(TAG, "start");
// Cancel any thread attempting to make a connection
if (mConnectThread != null) {
mConnectThread.cancel();
mConnectThread = null;
}
// Cancel any thread currently running a connection
if (mConnectedThread != null) {
mConnectedThread.cancel();
mConnectedThread = null;
}
// Start the thread to listen on a BluetoothServerSocket
if (mSecureAcceptThread == null) {
mSecureAcceptThread = new AcceptThread(true);
mSecureAcceptThread.start();
}
if (mInsecureAcceptThread == null) {
mInsecureAcceptThread = new AcceptThread(false);
mInsecureAcceptThread.start();
}
// Update UI title
updateUserInterfaceTitle();
}
/**
* Start the ConnectThread to initiate a connection to a remote device.
*
* @param device The BluetoothDevice to connect
* @param secure Socket Security type - Secure (true) , Insecure (false)
*/
public synchronized void connect(BluetoothDevice device, boolean secure) {
Log.d(TAG, "connect to: " + device);
// Cancel any thread attempting to make a connection
if (mState == STATE_CONNECTING) {
if (mConnectThread != null) {
mConnectThread.cancel();
mConnectThread = null;
}
}
// Cancel any thread currently running a connection
if (mConnectedThread != null) {
mConnectedThread.cancel();
mConnectedThread = null;
}
// Start the thread to connect with the given device
mConnectThread = new ConnectThread(device, secure);
mConnectThread.start();
// Update UI title
updateUserInterfaceTitle();
}
/**
* Start the ConnectedThread to begin managing a Bluetooth connection
*
* @param socket The BluetoothSocket on which the connection was made
* @param device The BluetoothDevice that has been connected
*/
public synchronized void connected(BluetoothSocket socket, BluetoothDevice
device, final String socketType) {
Log.d(TAG, "connected, Socket Type:" + socketType);
// Cancel the thread that completed the connection
if (mConnectThread != null) {
mConnectThread.cancel();
mConnectThread = null;
}
// Cancel any thread currently running a connection
if (mConnectedThread != null) {
mConnectedThread.cancel();
mConnectedThread = null;
}
// Cancel the accept thread because we only want to connect to one device
if (mSecureAcceptThread != null) {
mSecureAcceptThread.cancel();
mSecureAcceptThread = null;
}
if (mInsecureAcceptThread != null) {
mInsecureAcceptThread.cancel();
mInsecureAcceptThread = null;
}
// Start the thread to manage the connection and perform transmissions
mConnectedThread = new ConnectedThread(socket, socketType);
mConnectedThread.start();
// Send the name of the connected device back to the UI Activity
Message msg = mHandler.obtainMessage(Constants.MESSAGE_DEVICE_NAME);
Bundle bundle = new Bundle();
bundle.putString(Constants.DEVICE_NAME, device.getName());
msg.setData(bundle);
mHandler.sendMessage(msg);
// Update UI title
updateUserInterfaceTitle();
}
/**
* Stop all threads
*/
public synchronized void stop() {
Log.d(TAG, "stop");
if (mConnectThread != null) {
mConnectThread.cancel();
mConnectThread = null;
}
if (mConnectedThread != null) {
mConnectedThread.cancel();
mConnectedThread = null;
}
if (mSecureAcceptThread != null) {
mSecureAcceptThread.cancel();
mSecureAcceptThread = null;
}
if (mInsecureAcceptThread != null) {
mInsecureAcceptThread.cancel();
mInsecureAcceptThread = null;
}
mState = STATE_NONE;
// Update UI title
updateUserInterfaceTitle();
}
/**
* Write to the ConnectedThread in an unsynchronized manner
*
* @param out The bytes to write
* @see ConnectedThread#write(byte[])
*/
public void write(byte[] out) {
// Create temporary object
ConnectedThread r;
// Synchronize a copy of the ConnectedThread
synchronized (this) {
if (mState != STATE_CONNECTED) return;
r = mConnectedThread;
}
// Perform the write unsynchronized
r.write(out);
}
/**
* Indicate that the connection attempt failed and notify the UI Activity.
*/
private void connectionFailed() {
// Send a failure message back to the Activity
Message msg = mHandler.obtainMessage(Constants.MESSAGE_TOAST);
Bundle bundle = new Bundle();
bundle.putString(Constants.TOAST, "無法連線藍芽裝置...");
msg.setData(bundle);
mHandler.sendMessage(msg);
mState = STATE_NONE;
// Update UI title
updateUserInterfaceTitle();
// Start the service over to restart listening mode
BluetoothChatService.this.start();
}
/**
* Indicate that the connection was lost and notify the UI Activity.
*/
private void connectionLost() {
// Send a failure message back to the Activity
Message msg = mHandler.obtainMessage(Constants.MESSAGE_TOAST);
Bundle bundle = new Bundle();
bundle.putString(Constants.TOAST, "Device connection was lost");
msg.setData(bundle);
mHandler.sendMessage(msg);
mState = STATE_NONE;
// Update UI title
updateUserInterfaceTitle();
// Start the service over to restart listening mode
BluetoothChatService.this.start();
}
/**
* This thread runs while listening for incoming connections. It behaves
* like a server-side client. It runs until a connection is accepted
* (or until cancelled).
*/
private class AcceptThread extends Thread {
// The local server socket
private final BluetoothServerSocket mmServerSocket;
private String mSocketType;
public AcceptThread(boolean secure) {
BluetoothServerSocket tmp = null;
mSocketType = secure ? "Secure" : "Insecure";
// Create a new listening server socket
try {
if (secure) {
tmp = mAdapter.listenUsingRfcommWithServiceRecord(NAME_SECURE,
MY_UUID_SECURE);
} else {
tmp = mAdapter.listenUsingInsecureRfcommWithServiceRecord(
NAME_INSECURE, MY_UUID_INSECURE);
}
} catch (IOException e) {
Log.e(TAG, "Socket Type: " + mSocketType + "listen() failed", e);
}
mmServerSocket = tmp;
mState = STATE_LISTEN;
}
public void run() {
Log.d(TAG, "Socket Type: " + mSocketType +
"BEGIN mAcceptThread" + this);
setName("AcceptThread" + mSocketType);
BluetoothSocket socket = null;
// Listen to the server socket if we're not connected
while (mState != STATE_CONNECTED) {
try {
// This is a blocking call and will only return on a
// successful connection or an exception
socket = mmServerSocket.accept();
} catch (IOException e) {
Log.e(TAG, "Socket Type: " + mSocketType + "accept() failed", e);
break;
}
// If a connection was accepted
if (socket != null) {
synchronized (BluetoothChatService.this) {
switch (mState) {
case STATE_LISTEN:
case STATE_CONNECTING:
// Situation normal. Start the connected thread.
connected(socket, socket.getRemoteDevice(),
mSocketType);
break;
case STATE_NONE:
case STATE_CONNECTED:
// Either not ready or already connected. Terminate new socket.
try {
socket.close();
} catch (IOException e) {
Log.e(TAG, "Could not close unwanted socket", e);
}
break;
}
}
}
}
Log.i(TAG, "END mAcceptThread, socket Type: " + mSocketType);
}
public void cancel() {
Log.d(TAG, "Socket Type" + mSocketType + "cancel " + this);
try {
mmServerSocket.close();
} catch (IOException e) {
Log.e(TAG, "Socket Type" + mSocketType + "close() of server failed", e);
}
}
}
/**
* This thread runs while attempting to make an outgoing connection
* with a device. It runs straight through; the connection either
* succeeds or fails.
*/
private class ConnectThread extends Thread {
private final BluetoothSocket mmSocket;
private final BluetoothDevice mmDevice;
private String mSocketType;
public ConnectThread(BluetoothDevice device, boolean secure) {
mmDevice = device;
BluetoothSocket tmp = null;
mSocketType = secure ? "Secure" : "Insecure";
// Get a BluetoothSocket for a connection with the
// given BluetoothDevice
try {
if (secure) {
tmp = device.createRfcommSocketToServiceRecord(
MY_UUID_SECURE);
} else {
tmp = device.createInsecureRfcommSocketToServiceRecord(
MY_UUID_INSECURE);
}
} catch (IOException e) {
Log.e(TAG, "Socket Type: " + mSocketType + "create() failed", e);
}
mmSocket = tmp;
mState = STATE_CONNECTING;
}
public void run() {
Log.i(TAG, "BEGIN mConnectThread SocketType:" + mSocketType);
setName("ConnectThread" + mSocketType);
// Always cancel discovery because it will slow down a connection
mAdapter.cancelDiscovery();
// Make a connection to the BluetoothSocket
try {
// This is a blocking call and will only return on a
// successful connection or an exception
mmSocket.connect();
} catch (IOException e) {
// Close the socket
try {
mmSocket.close();
} catch (IOException e2) {
Log.e(TAG, "unable to close() " + mSocketType +
" socket during connection failure", e2);
}
connectionFailed();
return;
}
// Reset the ConnectThread because we're done
synchronized (BluetoothChatService.this) {
mConnectThread = null;
}
// Start the connected thread
connected(mmSocket, mmDevice, mSocketType);
}
public void cancel() {
try {
mmSocket.close();
} catch (IOException e) {
Log.e(TAG, "close() of connect " + mSocketType + " socket failed", e);
}
}
}
/**
* This thread runs during a connection with a remote device.
* It handles all incoming and outgoing transmissions.
*/
private class ConnectedThread extends Thread {
private final BluetoothSocket mmSocket;
private final InputStream mmInStream;
private final OutputStream mmOutStream;
public ConnectedThread(BluetoothSocket socket, String socketType) {
Log.d(TAG, "create ConnectedThread: " + socketType);
mmSocket = socket;
InputStream tmpIn = null;
OutputStream tmpOut = null;
// Get the BluetoothSocket input and output streams
try {
tmpIn = socket.getInputStream();
tmpOut = socket.getOutputStream();
} catch (IOException e) {
Log.e(TAG, "temp sockets not created", e);
}
mmInStream = tmpIn;
mmOutStream = tmpOut;
mState = STATE_CONNECTED;
}
public void run() {
Log.i(TAG, "BEGIN mConnectedThread");
byte[] buffer = new byte[1024];
int bytes;
// Keep listening to the InputStream while connected
while (mState == STATE_CONNECTED) {
try {
// Read from the InputStream
bytes = mmInStream.read(buffer);
// Send the obtained bytes to the UI Activity
mHandler.obtainMessage(Constants.MESSAGE_READ, bytes, -1, buffer)
.sendToTarget();
} catch (IOException e) {
Log.e(TAG, "disconnected", e);
connectionLost();
break;
}
}
}
/**
* Write to the connected OutStream.
*
* @param buffer The bytes to write
*/
public void write(byte[] buffer) {
try {
mmOutStream.write(buffer);
// Share the sent message back to the UI Activity
mHandler.obtainMessage(Constants.MESSAGE_WRITE, -1, -1, buffer)
.sendToTarget();
} catch (IOException e) {
Log.e(TAG, "Exception during write", e);
}
}
public void cancel() {
try {
mmSocket.close();
} catch (IOException e) {
Log.e(TAG, "close() of connect socket failed", e);
}
}
}
}
看似很長的一段程式碼,其實仔細閱讀並不難。提供了三個執行緒:
- AcceptThread 用來處理接收資料;
- ConnectThread 用來處理藍芽裝置連線;
- ConnectedThread 用來管理連線,進行資料傳輸。
接下來看具體的使用:
傳送方:
private final Handler mHandler = new Handler() {
@Override
public void handleMessage(Message msg) {
switch (msg.what){
case Constants.MESSAGE_WRITE:
T.showLong(MshipWaterTankActivity.this,"藍芽資料傳送成功!");
break;
case Constants.MESSAGE_READ:
//處理接收到的資料
break;
case Constants.MESSAGE_DEVICE_NAME:
try {
// save the connected device's name
mConnectedDeviceName = msg.getData().getString(Constants.DEVICE_NAME);
if (null != mContext) {
Toast.makeText(mContext, "藍芽已成功連線到: "
+ mConnectedDeviceName, Toast.LENGTH_SHORT).show();
}
//連線成功傳送資料
sendMsg();
} catch (Exception e) {
e.printStackTrace();
Log.e("wj","壓縮資料異常");
}
break;
case Constants.MESSAGE_TOAST:
if (null != mContext) {
Toast.makeText(mContext, msg.getData().getString(Constants.TOAST),
Toast.LENGTH_SHORT).show();
}
break;
}
}
};
@Override
protected void onStart() {
super.onStart();
// If BT is not on, request that it be enabled.
// setupChat() will then be called during onActivityResult
if (!mBluetoothAdapter.isEnabled()) {
Intent enableIntent = new Intent(BluetoothAdapter.ACTION_REQUEST_ENABLE);
startActivityForResult(enableIntent, REQUEST_ENABLE_BT);
// Otherwise, setup the chat session
} else if (mChatService == null) {
setupChat();
}
}
@Override
protected void onResume() {
super.onResume();
// Performing this check in onResume() covers the case in which BT was
// not enabled during onStart(), so we were paused to enable it...
// onResume() will be called when ACTION_REQUEST_ENABLE activity returns.
if (mChatService != null) {
// Only if the state is STATE_NONE, do we know that we haven't started already
if (mChatService.getState() == BluetoothChatService.STATE_NONE) {
// Start the Bluetooth chat services
mChatService.start();
}
}
@Override
protected void onActivityResult(int requestCode, int resultCode, Intent data) {
switch (requestCode){
case REQUEST_ENABLE_BT:
// When the request to enable Bluetooth returns
if (resultCode == Activity.RESULT_OK) {
// Bluetooth is now enabled, so set up a chat session
setupChat();
} else {
// User did not enable Bluetooth or an error occurred
Log.d("wj", "BT not enabled");
Toast.makeText(this, "藍芽會話已關閉",
Toast.LENGTH_SHORT).show();
}
break;
}
}
@Override
protected void onDestroy() {
super.onDestroy();
unregisterReceiver(mReceiver);
if (mChatService != null) {
mChatService.stop();
}
}
private void setupChat(){
// Initialize the BluetoothChatService to perform bluetooth connections
mChatService = new BluetoothChatService(this, mHandler);
// Initialize the buffer for outgoing messages
mOutStringBuffer = new StringBuffer("");
}
private void connectDevice(BluetoothDevice device, boolean secure) {
// Attempt to connect to the device
mChatService.connect(device, secure);
}
private void sendBluetoothMessage(String message) {
// Check that we're actually connected before trying anything
if (mChatService.getState() != BluetoothChatService.STATE_CONNECTED) {
Toast.makeText(this, "藍芽未連線...", Toast.LENGTH_SHORT).show();
return;
}
// Check that there's actually something to send
if (message.length() > 0) {
// Get the message bytes and tell the BluetoothChatService to write
byte[] send = message.getBytes();
mChatService.write(send);
// Reset out string buffer to zero and clear the edit text field
mOutStringBuffer.setLength(0);
}
}
...
程式碼並不是很全,但是可以看到關鍵的Service的初始化,裝置連線的方法以及傳輸資料的方法。
接收方:
其實跟上面的類似,只不過BluetoothChatService處理的handler不同,這裡就不再繼續贅述上面各種Service的初始化,看下核心handler的處理:
private final Handler mHandler = new Handler() {
@Override
public void handleMessage(Message msg) {
FragmentActivity activity = getActivity();
switch (msg.what) {
case Constants.MESSAGE_READ:
byte[] readBuf = (byte[]) msg.obj;
// construct a string from the valid bytes in the buffer
String readMessage = new String(readBuf, 0, msg.arg1);
dealContent(readMessage);//處理返回的資料
break;
case Constants.MESSAGE_DEVICE_NAME:
// save the connected device's name
mConnectedDeviceName = msg.getData().getString(Constants.DEVICE_NAME);
if (null != activity) {
Toast.makeText(activity, "已成功連線到 "
+ mConnectedDeviceName, Toast.LENGTH_SHORT).show();
}
break;
case Constants.MESSAGE_TOAST:
if (null != activity) {
Toast.makeText(activity, msg.getData().getString(Constants.TOAST),
Toast.LENGTH_SHORT).show();
}
break;
}
}
};
可以看到dealContent(readMessage)方法就是處理接收到的資料。
細心的你可能發現了,我在進行藍芽資料傳輸的時候對字串進行了壓縮處理,因為我傳輸的json字串超過了藍芽資料傳輸的最大限制,導致接收到的資料不完整,因此我對資料進行了壓縮和解壓縮處理。
這篇文章使用的是傳統藍芽的技術,Android4.0以後推出了BLE藍芽機制。開始我也下嘗試使用BLE實現兩臺平板間資料傳輸。但是仔細深入瞭解以後,BLE分外圍裝置和中央裝置,通常我們手機連線手錶或者一些智慧裝置都使用BLE的方式進行的資料傳輸。但是手機和手機通過BLE方式傳輸會有一個問題,需要我們自己將其中一臺裝置通過API處理成模擬外圍裝置,但是我在將一臺裝置模擬成外圍裝置進行資料傳輸的時候還是無法成功傳送資料,網上很多地方說Android自身不支援手機和手機間通過BLE傳輸資料,但我也沒有在官網找到明確的說法,總之 最終我放棄了BLE,還是用傳統藍芽實現了裝置間資料傳輸。
接下來有時間我會繼續對BLE的機制進行總結。歡迎大家留言交流。