1. 程式人生 > 其它 >ABB AC900F學習筆記52:Freelance_Mounting_and_Installation_AC_900F_Controller-12

ABB AC900F學習筆記52:Freelance_Mounting_and_Installation_AC_900F_Controller-12

3.2.3 CM 772F PROFIBUS-DP Master Interface CM 772 RROFIBUS主站介面 The number of possible slaves is determined by the total number of input and outputbytes. As a rule, many PROFIBUS PA devices (few I/O bytes) or a limited numberof remote I/O (many I/O bytes) can be connected to the bus. 能夠接入的從站數量由輸入和輸出總位元組數決定。通常,許多 PROFIBUS PA 裝置(帶有很少 I/O 位元組)或數量有限的遠端 I/O(許多 I/O 位元組)可以連線到匯流排。
Features
Protocol 協議 PROFIBUS-DP master V0/V1 PROFIBUS-DP主站
Fieldbus connection 現場匯流排連線 D-SUB, 9-pin, female connector 9針,母頭
Internal power supply 內部供電 Via coupler bus 通過耦合器匯流排
LEDs LED匯流排 Five LEDs for status display 5個LED狀態燈
Use 用於 AC 700F AC 900F (not with PM 904F) AC 700F和不含PM 904F的AC 900F
Form factor 外形 AC 700F
Controller redundancy support 對融域控制器的支援

NO

Hot plug 熱插拔

NO

HCIR

NO

LED status displays LED狀態顯示燈 After having been switched on, the CI 772 PROFIBUS module performs a self-testduring power-up. If the test is successfully performed, the yellow LED RDY lightsup, if not, the LED starts to flash and the initialization is aborted. If the LED RDYdoes not light up at all, the PROFIBUS module is probably defective. Duringinitialization, with newly configured modules or after a change of the operatingmode, all LEDs may light up briefly before reaching the defined status. 送電後,CI 772模板開始自檢。如果自檢成功執行,黃色的RDY(準備好)燈亮起,如果自檢沒通過,starts閃爍,終止初始化工作。如果RDY燈沒有亮起,可能是這個PROFIBUS模組由問題。在初始化過程中,使用新配置的模組或在操作模式更改後,所有 LED 可能會在達到定義狀態之前短暫亮起。

LED

LED燈

Color

顏色

Status

狀態

Meaning

含義

PWR

電源燈

Green

綠色

ON

Voltage is applied 已送電

OFF

No voltage is applied 未送電

RDY

準備好

Yellow

黃色

ON

Coupler ready for operation 耦合器準備工作
Cyclic flashing 週期閃爍 Boot loader is active 耦合器準備就緒
Non-cyclic flashing 無週期閃爍 Hardware or system error 硬體或系統錯誤

OFF

Defective hardware 硬體缺陷

RUN

執行燈

Green

綠色

ON

Communication on 通訊中
Cyclic flashing 週期閃爍 Ready for communication 準備通訊
Non-cyclic flashing 無週期閃爍 Parameterization error 引數化錯誤

OFF

No communication 沒有通訊

STA

狀態燈

Yellow

黃色燈

ON

DP master: data or token are transmitted via the network DP主站:資料或令牌通過網路傳輸

OFF

DP master: No token DP主站:沒有令牌

ERR

錯誤燈

Red

紅色

ON

PROFIBUS error PROFIBUS錯誤

OFF

No error 沒有錯誤