ABB AC 900F學習筆記87：Freelance_Mounting_and_Installation_AC_900F_Controller-47

阿新 • • 發佈：2021-08-22

繼續學習

9.1.5 CM 772F

Application 應用
CM 772F	PROFIBUS DP Master module PROFIBUS DP主站模板
Fieldbus 現場匯流排
Transmission protocol 傳輸協議	PROFIBUS-DP Master V0/V1 PROFIBUS-DP 主站 V0/V1
Transmission rate 傳輸速率	9.6 kBit/s to 12 MBit/s
Transmission standard 傳輸標準	EIA RS-485 as per EN 50170, potential-free EIA RS-485按照EN 50170，無電勢
Number of slaves 最大從站數量	max. 126, depending on the number ofI/O data 根據I/O 資料的數量，最大126個
Dual-port memory 雙埠儲存	8 kB
Fieldbus connection 現場匯流排連線	D-SUB, 9-pin, female connector 9 針，母頭聯結器
Electrical data 電氣資料
Current consumption 電流消耗	50 mA, via DC-IN of the CPU module 通過CPU模板的直流輸入，50 mA
Power dissipation 功率	1.2 W
Mechanical data 機械資料
Dimensions W x H x D 尺寸寬x 高x 深	28 x 135 x 75 mm
Weight 重量	96 g
Type of protection 防護等級	IP 20
Status indicators 狀態指示
LEDs LED燈	PWR, RDY, RUN, STA, ERR 電源，準備好，執行，狀態，錯誤
Ambient temperature 環境溫度
Operation 執行	0 ... +60 °C
Storage 儲存	- 25 ... +75 °C
Certificates 認證
Declaration of conformity 符合性宣告	CE
Approvals 批准	cULus cULus Class 1 Div 2 (groups A, B, C, D) EAC, GL

ABB AC 900F學習筆記87：Freelance_Mounting_and_Installation_AC_900F_Controller-47

繼續學習 9.1.5 CM 772F Application 應用 CM 772F PROFIBUS DP Master module PROFIBUS DP主站模板 Fieldbus

ABB AC 900F學習筆記66：Freelance_Mounting_and_Installation_AC_900F_Controller-26

6 Wiring 佈線 This section provides information on wiring the AC 900F controller exclusive of theCI/CM communication interface module. It contains safety instructions, generalguidelines and informati

ABB AC 900F學習筆記67：Freelance_Mounting_and_Installation_AC_900F_Controller-27

繼續學習 6.3 Controller earthing 控制器接地 Proper earthing of the controller requires an earthed mounting plate or metal frame.Additional earthing measures are only required if the mounting surface

ABB AC 900F學習筆記68：Freelance_Mounting_and_Installation_AC_900F_Controller-28

6.6 Switch cabinet 開關櫃 Low-impedance connections between the switch cabinet, mounting plate, earthing bar (PE) and shield bar must be provided

ABB AC 900F學習筆記76：Freelance_Mounting_and_Installation_AC_900F_Controller-36

繼續學習 7.2 Controller configuration via terminal program 通過終端程式設計進行控制器的配置

ABB AC 900F學習筆記78：Freelance_Mounting_and_Installation_AC_900F_Controller-38

繼續學習，這個文件即將學完了，還有10幾個文件，路漫漫啊 8 Service 維護 This section provides information on maintenance and service operations. As far asthe display unit is required for this purpose,

ABB AC 900F學習筆記79：Freelance_Mounting_and_Installation_AC_900F_Controller-39

繼續學習 8.1.2 I/O modules IO模板 The I/O bus of the CPU module is not designed for the connection anddisconnection of I/O modules during operation.

ABB AC 900F學習筆記85：Freelance_Mounting_and_Installation_AC_900F_Controller-45

繼續學習 9.1.3 CI 930F Application 應用 CI 930F PROFIBUS DP Master module PROFIBUS DP主站模板 Fieldbus

ABB AC 900F學習筆記88：Freelance_Mounting_and_Installation_AC_900F_Controller-48

繼續學習 9.1.6 CI 910F Applications 應用 CI 910F CAN Bus module CAN匯流排模板 Fieldbus 現場匯流排

ABB AC 900F學習筆記81：8.4 Offline functions of the display unit-41

繼續學習 8.4 Offline functions of the display unit 顯示單元的離線功能 The following information refers to functions that can only be performed offline.For this reason, the controller must be in Boot

ABB AC 900F學習筆記96：Freelance_Engineering_Process_Stations-02

繼續學習。 1 Process stations 過程站 1.1Overview 概述 A scalable Freelance system essentially consists of the process and operatorstations. You can perform the necessary configuration and commissioni

ABB AC 900F學習筆記101：Freelance_Engineering_Process_Stations-07

不知不覺ABB AC900F學習筆記超過100篇了。路漫漫，還有很多需要學習的。 3.4 General boot parameters

ABB AC 900F學習筆記103：Freelance_Engineering_Process_Stations-09

3.6 Parameters of the AC 800F and AC 800FR controllers AC 800F和AC 800FR控制器引數 3.7 Parameters of the AC 700F controllers

ABB AC 900F學習筆記104：Freelance_Engineering_Process_Stations-10

繼續學習，ABB 過程站 AC 900F介面模組 3.9 Interface modules for AC 900F and AC 700F AC 900F和AC 700F的介面模組

ABB AC 900F學習筆記105：Freelance_Engineering_Process_Stations-11

繼續學習，3.10 AC 900F使用者變數儲存 3.10 Permanent storage of user variables on AC 900F AC 900F使用者變數永久儲存

ABB AC 900F學習筆記106：Freelance_Engineering_Process_Stations-12

繼續學習，來到這個文件的第四章，也進入83頁的學習。沒有實際動手的練習，總是有點務虛。

ABB AC 900F學習筆記107：Freelance_Engineering_Process_Stations-13

繼續學習，這個文件終於學了100頁了，還剩60頁，繼續努力吧。 4.2 Status displays in the hardware structure

ABB AC 900F學習筆記117：Freelance_Engineering_Process_Stations-23

繼續學習 6.2 Task behavior in the event of an error 錯誤事件中的任務行為上圖中單詞簡單，就不翻譯了

ABB AC 900F學習筆記118：Freelance_Engineering_Process_Stations-24

繼續學習，這個文件也沒剩多少了。 6.3 Startup and shutdown performance of the modules 模組的啟停效能

ABB AC 900F學習筆記119：Freelance_Engineering_Process_Stations-25

繼續學習。 6.4 Power fail signal (PF) and power fail 電源故障訊號和電源故障 I/O modules maintain the last values until they have recognized the connectioninterruption and then adopt safety values un

ABB AC 900F學習筆記87：Freelance_Mounting_and_Installation_AC_900F_Controller-47

相關推薦